Hola! tengo el software chemstation B. 04.03 y necesito saber como realizar la comparacion del espectro de un estándar con el de la muestra para conocer el factor de matcheo. No me aparece el menú "spectra" en el software.
The Digest of upcoming webinars has been updated as of July 17.
Check out the Perfect Your PFAS Workflows webinar series here .
Notable additions include:
PFAS (2)
Check Out:
Analysis of Multiple Elements in Lithium Salts using an Autodilution…
Category/Series
Recorded/Upcoming Date
Recording Link
Atomic
7/23/2024
Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow
Atomic
8/6/2024
Elemental Analysis of Lithium-ion Battery Samples…
Thank you for your reply. I have not worked much with Gas GCs and I am not that familiar with different parts of it. I have performed leak check around front inlet and inside oven compartments (around columns). There was no leak. Could you please show…
The May 2011 issue of Dissolution Technologies ( https://dissolutiontech.com/DTresour/BackIssuefldr/BackIssuesfrmst.html ) compiles a lot of the thoughts of various agencies regarding the use of the alternate MQ procedure. MQ does have acceptance in most…
This is normal as PONA columns are apolar phases with thin films. For your light HC's < C5 either a thick film (ca. 5 µm) or another phase/column would help, but higher HC's cannot be done then (see also Lance's answer). It's either switching or backflushing…
Hi xiangui Are you running different methods in different worklists, or are the worklists all running the same method? I assume the same method across worklists, but this is not clear in your question.
Does this change in pressure lead to a change in…
This Information Applies To: 1100, 1200 and 1260 Infinity I and 1260 Infinity II LC Pumps (Excluding preparative pumps with electromagnetic purge valve (EMPV): G1361A. Not applicable to any of the 1290 Infinity II modules with automatic purge valve: G4220X...
This Information Applies To: Agilent 1260 Infinity G1315x DAD or G1365x MWD Modules
Issue:
Removing and re-installing Visible and UV lamps in Agilent 1260 Infinity G1315x DAD or G1365x MWD Modules.
Both the visible and UV lamps are consumable...
This Information Applies To: Agilent 1260 Infinity Binary, Quaternary or Isocratic Pumps.
Issue:
Removal of the pump head from the pump metering drive for maintenance on an Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump Module.
Steps...
This Information Applies To: All Agilent 1260 Infinity Binary, Quaternary, or Isocratic Pumps without the Seal Wash Option installed.
Issue:
Worn pump seals can shed small particles that can cause blockages and pressure issues downstream of the...
This Information Applies To: Agilent G7167x Multisampler modules
Issue:
Required when:
The needle seat is visibly damaged, blocked, or is leaking.
Leaks or blockages in the Vialsampler are observed, especially between the needle and needle...
This Information Applies To: Agilent 1260 Isocratic (G1310B) Quaternary (G1311B) Pumps.
Issue
Required when:
The inlet valve is defective.
The pressure or leak test in Lab Advisor suggests the inlet valve may require replacement.
A large...
This Information Applies To: Agilent 1260 Isocratic (G1310B) quaternary (G1311B) pump modules
Issue:
Required when:
The outlet valve is defective or leaking.
The pressure or leak test in Lab Advisor suggests the outlet valve may require replacement...
This Information Applies To: Agilent 1260 Isocratic (G1310B) quaternary (G1311B) pump modules
Issue:
The seal wear in procedure is important as it acts to "bed-in" the seals to ensure a leak free and pressure-tight pump head.
Required when:...
This Information Applies To: Agilent G7167A/B Infinity II Multisamplers
Issue:
The Agilent Multisampler autoreferencing procedure uses predefined positions on the base plate and the sample hotel to calibrate the positioning of the needle parkstation...
This Information Applies To: Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump Modules
Issue:
Reinstallation of the pump head on the pump metering drive during maintenance on an Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump...