Hello,
The Cary Help of Cary WinUV Software has plenty of information and videos on using the software and setting up accessories like the DRA. This can be accessed by hitting F1 while Cary WinUV is open. For your convenience, I have attached the help…
Good Morning,
The environmental documentation is located in the help files. There is a familiarization guide that I have attached that will get you started.
CONTINUE THE CONVERSATION - Ask questions of the speaker here in the community FULL TITLE: Analysis of Extractables & Leachables in Pharmaceutical Products: Regulatory & Analytical Aspects Presented by Andreas Tei, PhD, Global Pharma Segment Manager,…
Hi.. You can find this Functional Design Specification Document, it comes in Software USB drive. Attaching the same.. pls refer from page-15 onwards
PDF
Hi Peter, have you taken another look at the software? There could be several things happening there that would cause the software not to show the system icons. One could be simply that the instrument isn't being recognized by the software, or more likely…
We are encountering an issue where some very low abundance compounds look like MS/MS was attemptedto be acquired but the MS/MS spectra is empty (6546 QTOF).
This causes the following error when trying to generate a compound report using a custom template…
Hi Anna I updated tags to help visibility. You should rinse the inside of your ion source daily after runs are complete. You can rinse with an 80% IPA solution with a squirt bottle and a clean cloth. You should change your rough pump oil every 6mos. I…
Hi hebgent, Software licenses are granted for the use of the original purchaser and may not be duplicated. Single license means single incidence of use. I realize the software is out of production and support but I cannot find an age limitation to this…
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...