Hi j esus5802
You can try in Previous Results tap /Highlight the spectrum for changing sample name/
Go to view/ then click Data Handling/ enter new sample ID name in the field sample id name/
click on back/ and go to re-Analyze
Select a method…
Hi rahmicetinkaya
We do not have a user manual for a cary 630 FTRI gas cell module,. I have attached some explanations about the use of the gas cell. Hope it helps you
Thanks
Regards
Hi Ardalan.P
Did you change the computer or the computer name?
You can copy license file from "C:\ProgramData\Varian\Cary License.lic" into WinUV folder "C:\Program Files (x86)agilent\Cary WinUV\",
if you change the computer you should find the…
This video guides you through the process of replacing the Electron Multiplier Horn for the Ultivo (G6465A, G6465B), iQ (G6160A).
This video is intended to support the written instructions found in the online help or in your Instruments User Guide.…
This video guides you through the process of replacing the oil and filter for the MS120 pump and applies to G6495 models with an MS120 pump.
This video is intended to support the written instructions found in the online help or in your instrument's…
This video guides you through the oil and filter change process for the MS40+ pump and applies to all LC/MS models equipped with an MS40+ pump.
This video is intended to support the written instructions found in the online help or in your instrument…
This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...
This Information Applies To: Agilent 6890, 7890, 7820, 8890 and 8860 GC Systems with Split/Splitless (S/SL) inlet
Issue
Replacement of the Gold Seal is required as part of inlet maintenance. Replacement is required when the performance of the inlet...
This Information Applies To: Agilent GC Systems with Micro-ECD.
Issue
The Wipe Test is an annual test that performed by end user of the micro-ECD (Micro Electron Capture Detector or uECD) to help ensure radioactive safety when using the detector...
This Information Applies To: Agilent GC Systems with thermal conductivity detector (TCD)
Issue
Baking the thermal conductivity detector (TCD) at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Items...
This Information Applies To: Agilent GC Systems with flame ionization detector (FID)
Issue
Baking out the flame ionization detector at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Items required...
This Information Applies To: Micro Electron Capture Detector (uECD)
Issue
Baking the micro electron capture detector (µECD) at high temperatures can remove sample contaminants that have deposited on the detector surfaces.
Warning ...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue
This article will describe how an operator can configure the makeup gas on both the instrument keypad and the software driver (Method Editor).
Background...
This Information Applies To: Agilent HPLC systems
Issue
The presence of ghost peaks can be a symptom of a system contamination issue, caused by accumulation of sample and/or foreign substances in the flow path. It is critical for high sensitivity...