Hi Carol_Ultivo , There is always a trade-off or balance to be struck between Scan speed, mass resolution and sensitivity in any quadrupole mass filter. So, if you decrease the resolution and keep scan speeds the same you will naturally get an increase…
Yes - it was a bit of a mess - but I was able to fix it. Thanks for the heads up. Not everything could be fixed in the computer portion of the method. I had to go into the GC configuration and fix it there.
Thank you!
Thank you for the suggestions. Yes, some of what I'm doing does not require the ISTD but I leave it in the analysis method b/c of needing it in some of the work. I haven't had a chance to work on this in a couple of weeks, but will definitely keep it…
Hello Adrsto ,
I apologize for the delayed repsonse.
It is not possible to use the NIST algorithm itself within Unknowns Analysis. As you mentioned, you can adjust the forward and reverse settings and enable the Adjust Score option, which from the…
Hello Lstephan ,
I apologize for the delayed response.
Errors of this type generally point to an issue with a preferences file. The first thing to try is clearing these using the Restore User Settings tool found in the Quant Tools group in the start…
Hello AJohnson13 ,
This is a known issue if Acquisition has been pinned to the Windows Taskbar and run from there in MassHunter Acq Version 11.x and later. This is due to the OpenLab integration and the need to launch through Control Panel to include…
Please give more information. TSU - is that Thermal Screening Unit? You say under varying pressures...from zero to how many PSI/Bar? Will you need to use a vacuum to get the sample? Will this be analytes in air or something else? Decomposition of what…
Did the EM get replaced March 15? Or a source cleaning? The EMV went down 883V.
The Ent Lens (Entrance Lens) those jumps from 16 to 63,32,47.5 .. and the Ion Focus going from 80's to 40's... make me jumpy. Something was changing. When were source cleanings…
This Information Applies To: Agilent OpenLab CDS
Issue
Identifying the baseline codes and baseline code descriptions for OpenLab CDS
Background
OpenLab CDS Data Analysis includes the same integration algorithms as available in both OpenLAB...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to filter a signal in an Intelligent Report.
Requirements
To be able to carry out the procedure as described, the privilege of Data Processing...
This Information Applies To: Agilent OpenLab CDS
Issue
This article outlines different ways to quantify the amount of compound in an unknown sample.
Background
Quantitation uses peak area or height to determine the amount of a compound in...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle seat of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosamplers
Issue
Replacing the Needle Assembly of the Autosampler is required when:
The needle is visibly damaged.
Leaks or blockages in the...
This Information Applies To: Agilent 6000 Series LC/MS Systems equipped with MS40+ rotary vane pumps
Issue
Replacing the MS-40+ (rough pump) fluid periodically is a key maintenance procedure to improve vacuum performance and minimize the possibilities...
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...