This video guides you through the oil and filter change process for the MS40+ pump and applies to all LC/MS models equipped with an MS40+ pump.
This video is intended to support the written instructions found in the online help or in your instrument…
This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
The universal VUV detector has sensitivity better than an FID and similar to an MSD while allowing data acquisition across 12 different wavelength bands to focus on selected compounds of interest. It can be mounted directly on top of an Agilent 7890 or…
Hi,
I have been getting a Hexapole 2 RF fault on a 6545 QTOF for the past few weeks. The logbook shows that it came on for short periods for a couple of days, then went away for a few days, then came on continuously since then.
I called it in, and…
Hello mohls ,
The default location for the log file should be within the D:\MassHunter folder. Since it appears to be trying to write the log to the C:\Program Files folder, which will never succeed, I suspect that something has occurred with the BioConfirm…
T his collection of “best of” resources includes manuals and site-preparation checklists , specifications, application and how -it-works information, videos and webinars , and eLearning courses for Agilent Automated Liquid Handling instrument and software…
Ok so I guess you have to manually move the arm out because the inside screw is covered by the turret. It seems hard to move though and I don't want to break it.
According to the user manual you are able to change the following things in a timetable on a G7121A:
I actually never used a timetable on a G7121A model. Like the G1321C, the G7121A just offers one pair of EX/EM, so signal A only. For enhanced signal…
This Information Applies To: Agilent OpenLab CDS
Issue
Identifying the baseline codes and baseline code descriptions for OpenLab CDS
Background
OpenLab CDS Data Analysis includes the same integration algorithms as available in both OpenLAB...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to filter a signal in an Intelligent Report.
Requirements
To be able to carry out the procedure as described, the privilege of Data Processing...
This Information Applies To: Agilent OpenLab CDS
Issue
This article outlines different ways to quantify the amount of compound in an unknown sample.
Background
Quantitation uses peak area or height to determine the amount of a compound in...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle seat of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosamplers
Issue
Replacing the Needle Assembly of the Autosampler is required when:
The needle is visibly damaged.
Leaks or blockages in the...
This Information Applies To: Agilent 6000 Series LC/MS Systems equipped with MS40+ rotary vane pumps
Issue
Replacing the MS-40+ (rough pump) fluid periodically is a key maintenance procedure to improve vacuum performance and minimize the possibilities...
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...