6.80? It's getting a little confusing now. There never was a FW 6.80 for the G1321B, but maybe you had that on your pump. You did not talk about the configuration you have.
If entire stack gets updated to latest FW and you still see an issue, it is…
Hi Pillai,
Thank you for this information. I recommend trying a different cellular adhesive to see if this improves the detaching. Additionally, you may want to increase your seeding density as 10K/well was used in this paper (though these cells were…
Important Information to Set Up Agilent as a Vendor
The Agilent and eMSion teams are excited to announce that, as of 3 June 2024, orders for all products will be handled by Agilent. The currently available software and hardware have been added to Agilent…
Join Agilent Senior Application Engineer, John Screech, live as he explores the critical concepts of vacuum.
We’ll begin with Q = P x S, the formula that explains EVERYTHING about the relationship between gas load, pumping speed, and pressure. John…
This Webinar focuses on the challenges in progressing from High Vacuum (approx. 10^-8 Torr) to Ultra-High Vacuum (below 10^-9 Torr) Pressure. Ion Pumps and Cryo-Molecular pumps are discussed in detail, as are the modifications to High Vacuum Gauges that…
Paul thanks for your reply. I have looked for information about these traps because I have two RMSH-2 traps and I thought about using one for the carrier gas (He) and the other for the FID hydrogen. Anyway, I'm going to buy the hydrogen trap. Thanks …
Agilent GC Knowledge Portal
The Agilent GC Knowledge Portal provides you with easy access to current operation, maintenance, best practices and troubleshooting information. Articles on the portal are produced through collaboration with Agilent experts…
Agilent GC Columns and Supplies
Things to consider:
Did you purchase additional required install supplies from Agilent, or will you be providing your own?
Did you purchase sufficient supplies to begin normal operations of the instruments?
Did…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...