Hi Biyi ! Is it that the QTOF appears online the Agilent MassHunter Workstation Data Acquisition software? When I power cycle my 6545 XT Q-TOF, I push the power button the Q-TOF and wait maybe 30 seconds. We try not to go more than a minute of being off…
Hi friends!
For starters, here is information about my equipment:
Instrument
Model
1290 Multisampler
G7167B
1290 High Speed Pump
G7120A
1290 Column Compartment
G7116B
6545 XT LC/Q-TOF
G6549A
Reagents…
When attempting to submit a sequence in EZChrom, it fails to submit and returns this error message:
This happens each time a sequence is submitted. Any help would be appreciated!
It seems that analysts have access to all method versions saved. Is there a way to Analysts them only have access to method versions that are approved?
Hello,
I'm about to replace the nitrogen tank that feeds the collision cell on our 6545 QTOF. I just have a simple question, can I change the nitrogen tank while the MS is in stand-by mode or does it need to be vented ?
This brings me to a second…
Hello Marty,
Thank you very much for your prompt and informative responce. I've viewed the video and immedeatly have made coressponding changes in my report template. This is exaclty what I was looking for. Now, I can use one template for different…
Hi LD,
You are very welcome! Our protocol recommends using 95% ethanol (do not use 100 % ethanol as it contains traces of benzene, which is detrimental to mitochondrial function) rather than DMSO. Also be sure not to add ethanol to the injection ports…
Hello strader.kh ,
If you are using Excel report templates you must generate the report.results.xml file to get a report.
If you are not using Excel templates you can disable the generation of this file in the Results tab of the Report Method Editor…
Hello,
What software and version are you using? I would assume it is OpenLab CDS 2.x, either workstation plus or a client server system. If you have one of these systems, it is possible to get orphaned IDs in the database, which can stop the system…
This Information Applies To: Agilent G4208A Instant Pilot
Issue
This article describes how to switch the illumination of the autosampler on or off (if available) using the G4208A Instant Pilot.
Items Required
G4208A Instant Pilot for Agilent...
This Information Applies To: Agilent 7683B Automatic Liquid Sampler
Issue:
O nly use this alignment procedure if the injector hardware configuration has changed or if the Align Mode light comes on.
Agilent does not recommend performing this procedure...
This Information Applies To: Agilent MassHunter data acquisition software and MassHunter Quantitative Data Analysis Software
Issue
This article explains the difference between quantifier and qualifier ions and provides some general guidance on quantifier...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Fragment Analyzer controller software
Issue:
Over time the dynamic coating polymer on the capillaries needs to be refreshed. Failure to do so can lead to a loss of performance. Indicators...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
Elevated doubly charged values that are greater than 3% for x-lens configuration or greater than 7% for s-lens configuration, can be caused by contamination, or an...
This Information Applies To: Agilent 6200 Series TOF and 6500 Series Q-TOF Systems
Issue
Instructions on how to correctly dilute the tune mix for 6200 Series TOF and 6500 Series Q-TOF systems depending on source type.
Background
If the Tune...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0
Issue
The Agilent MassHunter Qualitative software can generate qualitative analysis reports, which may include sample chromatogram information and sample...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0 or higher
Issue
Identifying compounds using a spectral library is essential in qualitative analysis. This article will describe how to load a data file and...
This Information Applies To: Agilent ICP-MS Systems
Issue
The Helium cell gas line on the ICP-MS may be contaminated with air and moisture in case of a tank replacement, or if the instrument was not used for an extended amount of time. Purging the...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The Calibration Curve window tools help with setting an appropriate calibration curve for each compound in the calibration table.
The Calibration Curve window...