Thanks for your help!
Here is the method:
/cfs-file/__key/communityserver-discussions-components-files/147/0878.acqmeth.txt
This is the scan chromatogram focusing on MMA in the SIM region. I performed another injection of 0.8 uL MMA to help identify…
Thank you for all your suggestions, this is what I have done so far, With computer disconnected from our Network (to eliminate firewall issues, as per recommended by or IS/IT department): Both instruments connected through hub - failed Only 6850 connected…
Hi, Thanks a lot for your great help. However, how to use "Import worklist" function to import entries into the user defined " Amt. and Tot. Amt. " column? Other info are import succesfully except the two ones. I tired " Amt.","Tot. Amt. " in the importing…
I am not able to connect to the instrument using Lab Advisor because the instrument is connected to OpenLab. We should be able to disconnect using "Close Connection" from the OpenLab Control Panel, but it gives the following error when I try:
Agilent…
When I want to save or export a worksheet, does the software give me the option where to save it? When you save a worksheet, it always saves to the database. It will appear on the home page within Mercury. When you “export” either the data as .csv (via…
Thank you for your help, Paul. I'm not sure what happened on October 27. Many people use this system.
This morning, the system passed the Tune Evaluation, but the HiVac is still off. I looked at the Manual Tune task box, but do not see where I have…
Hello, everyone! I see a similar thread with masshunter , but not chemstation. Do I need a macro to do the job with retention indices? Are such macros available for download? I'd like to identify some VOC by indices in an n-alkanes scale in a hardware…
We have three Sulfur SCDs, two of which have inordinately high signal outputs:
1) Agilent 355; Model #G6644A; SN #CN11411006; PMT #DC7303; with FID on HP 5890 Series B
2) Sievers 355; Model SCD355; SN #0500-918; PMT #WB5942; with FID on HP 5890 Series…
The 6850 & 6890 LAN adapters are very often configured to respond to a "BOOTP" server program running on the network they are wired to.
So upon powerdown the GC loses its previously assigned IP address, and later upon powerup the GC sends a request…
Dear Royboyle, Thank you for you email, i am still having issue with peak purity at 50% sensitivity the peak purity of standard is failing and when i change the sensitivity to 40% then it passes, i am bit confused now what is the standard guideline regarding…
This Information Applies To: Agilent OpenLab ChemStation
Issue
When launching OpenLab ChemStation Online or Offline session, the following error messages “ ChemStation ChemMain has stopped working ” or " There is a problem with Adobe Acrobat/Reader...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Agilent Femto Pulse, Agilent ZAG DNA Analyzer
Issue: The instrument encounters a run error, Run Aborted, Position fault: Did not reach target Z position ( Figure 1 ) . This error...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, Oligo Pro II
Issue:
This article explains the steps to take after installing a brand new array in the Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG, and...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...