As " alfausett " said, in case of headspace much depends upon sample matrix along with other factors. Honestly i am bit surprised that you are fine when injecting as liquid. In case of the liquid majority have issue with acetic acid peak shapes at some…
It all depends how old is your column or how it is handled when not in use. This is pretty much normal with majority of the columns when used in temperature programming. Some vendors claim to provide "zero bleed" columns but honestly there are many if…
The Digest of upcoming webinars has been updated as of March 7.
Notable additions include:
Atomic (1)
Automated Electrophoresis (1)
Chromatography and Mass Spec (12)
Vacuum Solutions Series (3)
Check Out:
The Analysis of Petroleum…
Iron(II)fumarate is a salt with a melting point of 280 °C and therefore not suitable for gas chromatographic analysis. You need to remove the metal ion and set the fumaric acid free, get the sample dry to derivatize it with BSTFA or do an esterification…
Hello,
The infinity II is the HPLC hardware, that can be controlled by several different Agilent software platforms CDS 2.x, Chemstation, EZChrom plus third party data systems. In most of the Agilent software, if you can find the help menus, there…
Hello,
You cannot change the presentation of that results preview screen directly in Chemstation. You might be able to change the behavior using macros, but no configuration is available by default.
Marty
Hello,
Based on the ladder profile in the screenshot you shared, it appears that you are running the DNF-905 kit.
In reference to the issue of missing sample signal or blank lanes, since ladder and marker peaks are present as expected, issue is likely…
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RIN NA, Error 4501, RNA 6000 Nano kit (p/n 5067–1511 ), RNA 6000 Pico kit (p/n 5067–1513 )
Issue:
The RIN is not displayed in the software or shows as NA. If the RIN is NA, the...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RNA 6000 Nano kit (p/n 5067-1511), RNA 6000 Pico kit (p/n 5067-1513)
Issue:
Which assay should be selected in the Agilent 2100 Expert software when running yeast total RNA samples...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software, RNA assay, DNA assay, Protein assay
Issue:
The X-axis description toggle icon in the Agilent 2100 Expert software toolbar ( Figure 1 ) does not change the X-axis from time...