Hello EhsanKhedive ,
I can confirm that this feature does not appear to be implemented in Qual B.07.
The library RT is extracted in Qual B.08 and later, so if you require that functionality you would need to upgrade to the latest version of Qual.
Hello MatteoUnisa ,
Let me add to this by saying in limited testing it appears that Qual 12.0 is able to search compounds imported from CEF files. Still, I would recommend working with your local support team to confirm this for your workflow and investigate…
Hello MattSmithChemist and CBM ,
Product support has released new information on the 12.1 tune report and confirmed that the low mass ion was changed to m/z 42 for all TQ. It will only show on classic instruments if the option to 'Tune masses < 100…
Hello Dang ,
Manually integrated peaks are flagged in the batch table, and there are also indicators in the Compound Chromatogram.
You can also change the fill color of manually integrated peaks if you want that to stand out more.
There is…
Hello twitsok ,
Since the relative concentration for your QC is showing as different from the standards it is possible that the method has become corrupted or concentration values in the method were changed but the batch was not fully analyzed. If you…
This Information Applies To: 2200/4200/4250 TapeStation systems, TapeStation D1000 ScreenTape assay, TapeStation High Sensitivity D1000 ScreenTape assay, TapeStation analysis software
Issue:
A sharp peak appears at the lower end of the NGS library...
This Information Applies To: Agilent Variable Wavelength Detector G1314x and G7114A/B modules.
Issue
As UV deuterium lamps ages, the light intensity decreases, the sensitivity of detection may deteriorate. Replace the lamp when the intensity test...
This Information Applies To: Agilent 6850, 6890, 7820, 7890, 8850, 8860, 8890, Intuvo 9000 GC Systems with a Thermal Conductivity Detector (TCD)
Issue
The TCD temperature, column (carrier), makeup, and reference flow rates need to be optimized to...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
This article explains how to install the Agilent 2100 Expert software and connect a PC to an Agilent 2100 Bioanalyzer system.
Steps to follow:
The latest version of...
This Information Applies To: 2100 Bioanalyzer systems, 2100 Expert software
Issue: W hen trying to launch the Agilent 2100 Expert software, the process aborts and the user sees run-time error message :
Run-time error '50003 ' often indicates...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The DV 200 score is a quality score for evaluating quality of RNA derived from formalin-fixed paraffin-embedded (FFPE) samples established by Illumina Inc. in 2016. It represents...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software without Security Pack addon
Issue
The 2100 Expert software gives a counter mismatch error in the log book which may lead to data loss (blank lanes). Specifically...
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...