• Created : 
  • Modified : 
  • Category :  Agilent Knowledge Portal
  • Entry Type :  Article
  • Product Type :  Analytical LC Systems Preparative LC Systems
  • Component :  LC Instrument Control Software
  • Product Name :  Lab Advisor Software
  • Task :  Installation
Related Articles

  • How to Add a New System in Lab Advisor

    This Information Applies To: Agilent Lab Advisor Software Issue: Lab Advisor Software provides state-of-the-art tests, tools, and calibrations to support you in the daily operation, maintenance, and basic troubleshooting tasks. This article describes how to add a new Agilent LC system within Lab Advisor. Steps to follow: Open Lab Advisor and click Add System . Type a name for the instrument. Do not use special characters, only numbers and letters. Enter the instrument address...

  • Identifying the Version of my Agilent Lab Advisor Software

    This Information Applies To: Agilent Lab Advisor Software Issue Steps to identify the version of Agilent Lab Advisor software that you are currently using. Steps to Follow Launch Lab Advisor from the Windows start menu by clicking Agilent > Lab Advisor or by clicking the desktop icon. Figure 1: Agilent Lab Advisor desktop icon From the Tasks menu, click Configuration. Figure 2 : Agilent Lab Advisor Tasks window Software information is on the About section ( Figure 3 ), or...

  • How to Remove and Reinstall the Loop Capillary in G4226A/G1367E High Performance (HiP) Autosamplers

    This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosampler Issue Replacing the Loop Capillary of the Autosampler is required when it is broken or leaking. Items Required Wrench open 1/4 - 5/16 inch (p/n 8710-0510 ) For an Agilent 1290 Infinity (G4226A) HiP Autosampler, one of the following: Loop cartridge 20 µL, Red Capillary (p/n G4226-60310 ) Loop cartridge 40 µL, Green Capillary (p/n 5067-4703 ) Loop cartridge 100 µL...

  • Troubleshooting Remote/Cluster Partner Missing Error

    This Information Applies To: All Agilent LC systems. Issue: A cluster is partnership between modules. Most modules are linked to other modules automatically, without intervention from the user, but sometimes the cluster is configured manually. Examples: 1. To work as a ‘one module’ unit, independent modules must be clustered (e.g.: Two G1361A prep pumps are clustered to make one gradient pump). 2. A valve pressure cluster between the 1290 Infinity pump and external valves allows for correct...

  • How to Change the Needle and Needle Seat in an Agilent G7129x Vialsampler

    This Information Applies To: Agilent G7129A/B/C Vialsampler Issue: Replacing the needle and needle seat of the Vialsampler is required when: The needle is visibly damaged. Leaks or blockages in the vialsampler are observed, especially between the needle and needle seat. The limit for the needle interaction EMF counter is exceeded. The needle needs to be replaced as part of yearly maintenance. Over time, deposits can block the needle and the needle seat causing pressure issues...

How to Install Lab Advisor

Answer

This Information Applies To: Agilent Lab Advisor Software

Issue:

Lab Advisor is a useful tool for the LC instrument with tests, tools, and calibrations to support the daily operation, maintenance, and basic troubleshooting tasks. The application allows to perform troubleshooting and maintenance tasks efficiently and with little effort.

Steps to follow:

  1. Copy-paste the following link in the browser and download the latest available version of Lab Advisor: https://labadvisor.pl29.agilent.com/latest 
  2. Downloading will start immediately.
  3. After downloading, open the file and the Installation Wizard will pop up.
  4. Follow the steps from the Installation Wizard.
  5. After finishing the installation, the Lab Advisor shortcut will be on the desktop.

To add an instrument to Lab Advisor please follow the instructions from How to Add a New System in Lab Advisor .

 Tip 
Learn more on how to operate your Agilent Lab Advisor Software:
Agilent Lab Advisor User Manual on Agilent.com

 

 
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help