• Created : 
  • Modified : 
  • Category :  Agilent Knowledge Portal
  • Entry Type :  Article
  • Product Type :  ICP-OES Software
  • Product Name :  ICP Expert software PRO ICP Expert software base
  • Task :  Administration Installation
Related Articles

  • How to Reset the AVS 6/7 on Agilent ICP-OES Instruments

    This Information Applies To: 5000 series ICP-OES (5100/5110/5800/5900), ICP Expert Issue How to Reset the AVS 6/7 after maintenance or when a red LED is visible Steps to follow Tips : Instructions for changing the AVS switching valve can be found in the ICP Expert Help under “Hardware How to” and “Replace the AVS 4/6/7 Tubing”. Figure 1. ICP Expert Help After replacing the AVS valve and tubing, a red LED is showing on the AVS plate. Figure 2 shows the location...

  • Customizing Agilent ICP-OES Maintenance for Sample Matrix and Sample Numbers

    This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900) with ICP Expert 7.5.x Software Issue The Recommended Routine Maintenance Schedule does not adjust for the number of samples analyses or the sample matrix, both of which impact maintenance requirements. Too frequent maintenance increases downtime and consumable costs, too infrequent can impact analytical performance. The ICP Expert User Maintenance Counters enable the maintenance schedule to be set to match the...

  • ICP-OES Detector and Instrument Calibration

    This Information Applies To: Agilent 5000 Series ICP-OES (5100, 5110, 5800, 5900) Issue How to calibrate the ICP-OES ICP-OES calibration is a two-step procedure: The detector calibration performs a dark current calibration to correct for detector and electronic background signals. The instrument calibration uses a specified calibration solution to calibrate the wavelengths of the polychromator. ICP-OES wavelength calibration solution is available as either Agilent ICP-OES wavelength...

  • Finding Lost IP address of 5000 Series ICP-OES - Instrument Locator

    This Information Applies To: Agilent 5100, 5110, 5800, and 5900 ICP-OES systems Issue When troubleshooting communication issues between Agilent 5000 Series ICP-OES and the instrument controlling computer, it is necessary to know the IP address of the ICP-OES. If the IP address of an instrument has been lost, it can be rediscovered using the ICP Instrument Locator tool. This tool will list the IP address and host name of all 5100, 5110, 5800 and 5900 ICP-OES instruments on the local network...

  • How to Check my Agilent ICP Expert Software Version?

    This Information Applies To: Agilent ICP Expert software. Issue The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc. Steps to Follow Launch ICP Expert software from the Windows menu Agilent > ICP Expert or by clicking the desktop icon. Figure 1: ICP Expert software desktop icon After ICP Expert software starts, on the top-right of the screen, click the pull-down menu next the Help button. Click...

How to Upgrade ICP Expert version 7.5

Answer

This Information Applies To: 5000 series ICP-OES (5100/5110/5800/5900) ICP Expert version 7.5

Issue

How to install an upgrade version of ICP Expert via USB to current ICP Expert (i.e. 7.5.2 upgraded to 7.5.3)

Resolution 

To upgrade the current version of software to the new version of software, please have your current ICP Expert Software closed and log onto the computer with Administrator privileges.

1. Insert the ICP Expert software USB in the PC

2. If AutoPlay prompts to Run ICPExpertSetup.exe, select Yes

3. If no prompt appears, navigate through the file explorer to the ICP Expert USB

4. Open the folders to look for "ICPExpertSetup" application (Figure 1) and double click to run the application

Figure 1. Icon for ICPExpertSetup.exe

5. When asked for permission to makes changes, select Yes

6. When asked for destination location, it is recommended to use the default location of C:\Program Files (x86) and selecting Install on the prompt box

7. Allow the program to complete and follow the prompts as they appear

8. Select Finish when prompted

9. The PC may need to be restarted, allow if prompted.  If not prompted, once installation is complete, manually restart the PC

10. The upgrade is now complete and ICP Expert can be used normally.

 

 Tip 
Learn how to effectively operate your Agilent ICP-OES:
 
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help