This Information Applies To: Agilent ICP-MS MassHunter Software 4.x and 5.x
Issue
How to view meters in ICP-MS MassHunter Software, or change what meters are selected?
Background
ICP-MS MassHunter allows up to five meters to be displayed at the same time in the Instrument Status pane. Depending on the software version, the steps to view/change meters differ slightly.
ICP-MS MassHunter 4.6 and below
ICP-MS MassHunter 5.1 and above
For ICP-MS MassHunter 4.6 and below
Open ICP-MS Instrument Control
In the menu bar, click View > Meters (Figure 1).
If no menu bar is shown, press the F10 key on the PC keyboard.
For ICP-MS MassHunter 5.1 and above
Open ICP-MS Instrument Control
From the View tab, click Meters (Figure 4).
Learn how to effectively operate your Agilent ICP-MS System:
Agilent 7800/7850/7900 ICP-MS with MassHunter Agilent 8900 Triple Quadrupole ICP-MS with MassHunter e-learning courses available from Agilent education |