Post-run Macro to export Signal Raw Data to ASCII

Hi Amedeo,

Attached is a more complete macro for you.  It will export multiple signals and place the ASCII file in the samples data directory.

Just put the user.mac file in the C:\Chem32\Core directory and add the "EXPORTSIGNALS" macro to the post run macro in the runtime checklist.

Let me know if you have any problems.

Tim

Hi hebgent!

I tried your macros but keep getting parser errors.

user.mac and extractsignal.mac are both placed in the CORE directory.

Extractsignal.mac is set as the postrun macro.

I have also tried user.mac as the postrun macro and have tried them both from the command line.

There is always a parser error.

We are using the latest release of Chemstation.

Currently, I have 3 signals; 2 from the DAD and one from the FID.

Any thoughts?

Thanks!

The macro exports data in the ChromReg register but only the signals listed in the Signal Details of the method are loaded into the register.  So by adding all the desired signals to the Signal Details of the method you will get each exported.  Or if you don't like doing that because of how it changes the default reports we can reload the sample data file at the start of the macro which will load all signals.

You are correct, the FLD is stored in a different register.  I'll work on adding that register to the macro.

Tim

I don't have a FLD and I'm not sure about the register structure.  It should be similar to all LC register objects so it might be an easy fix.  Would you be able to attach a FLD signal file so I can test the macro?

Thanks

Tim

This FLD signal file is from a blank run...

Thanks!!!

I've attached an updated macro.  The exported data files are now called DAD1A.txt, FLD1A.txt, FID1B.txt....and so on.

The FLD data does get loaded into the ChromReg register but only if its added in the Signal details.  So I've added a LoadFile command at the beginning of the macro which loads all the signals for the current sample and then it can export them all.  It will open a "Current Chromatogram(s)" window for them and I can't figure out how to automatically close that window when it's done.  Its not a big deal because it will continue to use that one window for every sample in a sequence, leaving you with one window open at the end.

Anyway, give this one a try.

Tim

Your timing is exquisite!

I have a bunch of runs that should come out around 6:00 PM...

Hopefully the signals are automatically exported to make pretty slides that can be emailed to someone already on their plane taxiing down the runway... It's Hail Mary time!

Thanks again!

David

So far, so good!

I just retrieved my first data set into Excel.

The signals are all there and named as advertised.

That "Current Chromatogram" window isn't a big deal, I just close it if I need to take a look and it doesn't seem to mind.

Thanks!

So far, so good!

I just retrieved my first data set into Excel.

The signals are all there and named as advertised.

That "Current Chromatogram" window isn't a big deal, I just close it if I need to take a look and it doesn't seem to mind.

Thanks!

Good to hear.

I thought changing the names to the singal ID made more sense.  Less chance of confusion.

Tim

Hi Tim,

Firstly, thanks for posting this macro online, I've already found it very useful to export the signal data from HPLC chromatograms. In the current version of the macro, are the %B also meant to be exported? When I run the macro either as a post-run macro or separately in the command line for a previous run, I never seem to get the %B exported. Is this perhaps because the %B is stored under the instrument curves tab, rather than the signals (in the data analysis windows, I'm not sure what this corresponds to in the registers).

Currently, if I export the %B as a .csv, separately, the time axis is on a different scale to that in the .txt files from the macro, hence my question.

Any help or advice here, would be great.

Many thanks in advance,
Rohan

Hi Rohan,

The last version of the macro was meant to only export RAW signal data.

Are you looking to get the RAW signal data and REPORT data on the same text file?

Tim

Hi Tim,

Thanks for posting this macro. Is it only possible to run the macro when the sample is running on the machine? I've already run all of my samples and just want to avoid having to manually export the signal data for all of them.

I've added it to my run time checklist but when I go to "Start Sequence Reprocessing" in the chemstation offline app I'm not seeing any new files generated and it looks like there is a parsing error in the log. 

I'm using Open Lab CDS ChemStation for LC C.01.09[144]

Thanks!

Colleen