Has anyone managed to get an 8453 UV/Vis to work under Windows 10?

The unit connects using a JetDIrect card - there are no dip switches on it. I've also tried connecting using the GPIB interface with the same result. I did manage to get it to work once by connecting to it using the old Win7 computer, then disconnecting it and connecting to the Win10 one. However, once rebooted the connection was lost. I've even installed Bootp but that hasn't helped.

The unit connects using a JetDIrect card - there are no dip switches on it. I've also tried connecting using the GPIB interface with the same result. I did manage to get it to work once by connecting to it using the old Win7 computer, then disconnecting it and connecting to the Win10 one. However, once rebooted the connection was lost. I've even installed Bootp but that hasn't helped.

The HP Jet Direct card was not supported on Agilent instruments after Windows XP.  

It works fine under Windows 7 - I guess Windows 10 is the straw that has broken the camel's back. In the meantime I may have found a couple of G1369G LAN cards that should cure the problem.