masshunter report builder about qualifier peak show to peak overlay in graphics

Is this a report builder file?

Yes

i use masshunter report builder 

Hello jeremy_lai ,

If you want to add the QualifierPeak graphic, you will need to add a binding for the qualifier and then reference that in the Qualifier ID section under properties. There is an example of how to do this in the template attached. For reference this was originally posted in the following discussion.

(+) Struggling with report builder for MassHunter Quant 10 - Mass Spectrometry Software User Forum - Mass Spectrometry Software - Agilent Community

Gen_ResultsSummary_TEST05.template.xml.zip

hi howard 

Thanks for your reply.

In addition,can i show ratio in the graphic?

Hello jeremy_lai ,

Available graphics options for reports can be found on the Graphics settings tab in the Report Method editor. From what I can find, the Qualifier graphic does not have any specific display options available. The only ones that apply to it are the ones shared with all Peak chromatograms.