additional installing low pressure mixer assembly G4204-81090 at G7111B

hi Andy, 

thanks. Do you Mean a "Jet Weaver" after the Pump Head? (or another product?)
Do you agree that improve the perfomance?  

Hi treavour

I guess that depends what you mean by performance.  If you're looking for improved mixing then you could try a JetWeaver, but I'm not sure what additional pressure this would generate.  The mixer used on the 1260 binary pump G1312-87330, might be a good alternative, but would add a significant volume to the pump.

Andy

Hi treavour

I guess that depends what you mean by performance.  If you're looking for improved mixing then you could try a JetWeaver, but I'm not sure what additional pressure this would generate.  The mixer used on the 1260 binary pump G1312-87330, might be a good alternative, but would add a significant volume to the pump.

Andy

The Jet weaver or the inlet weaver will not fit on this pump.