Hello,
i need to additional installing the low pressure mixer (G4204-81090) at the quaternary pump G71117B - to improve the perfomace.
The Pump has a AIV - ist there possible?
Is it possible to change the AIV to PIV?
thanks,
Find maintenance, best practice, and troubleshooting articles.
Hello,
i need to additional installing the low pressure mixer (G4204-81090) at the quaternary pump G71117B - to improve the perfomace.
The Pump has a AIV - ist there possible?
Is it possible to change the AIV to PIV?
thanks,
Hi treavour
You can certainly change AIV to PIV, but I'm not sure that it us possible to install the G4204-81090 "inlet weaver" into a 1260 quaternary pump. It's probably better to install additional mixing after the pump head, rather than before it.
Andy
hi Andy,
thanks. Do you Mean a "Jet Weaver" after the Pump Head? (or another product?)
Do you agree that improve the perfomance?
Hi treavour
I guess that depends what you mean by performance. If you're looking for improved mixing then you could try a JetWeaver, but I'm not sure what additional pressure this would generate. The mixer used on the 1260 binary pump G1312-87330, might be a good alternative, but would add a significant volume to the pump.
Andy
The Jet weaver or the inlet weaver will not fit on this pump.