I have a 6890N GC with dual FID. The back column has a much higher flow rate than the front column. The two columns are identical and the setup for inlet, column and detector are identical. I have also swapped the EPC's between the two detectors. Seems…
We don't know what is in your water samples, but on a CP-Wax 57 CB benzene and isopropanol are eluting very close to ethanol, just in front of it.
You can find examples of applications of alcoholic beverages on Wax 57 (all types) in Scanview ( (+) Software…
Hello mckenzie.stevens ,
Did this error occur when attempting to work with the FID data? I've not seen this exact error, but it is possible to receive similar errors when having a spectrum tool selected and trying to work with non-MS data. If you then…
I have Software Leak Test Data Wizard for VS Series Leak Detectors, but have problem to reinstall because folder Data was corrupted the file data.cab missing. Failed to install. Can anyone help without need to buy new CD Software ? withou need to buy…
Hello, I would appreciate any help possible with this question. I have an Ultivo LC/TQ and it is having the problem with autotuning. It fails due to spray stability. Due to this I am thinking it might be the nebulizer? I take it out and see good spray;…
It's OK.
I don't know if the valve is included in the pump or somewhere else.
If the valve fails, we'll have to use our Agilent maintenance/repair contract to clean the system... ;)
Hello. We have a 2- dimension gc/fid/ms 8890/5977C with a masshunter software. Our aim is to quantify molecular markers (e.g. 1,3,5-Tri-tert - Butylbenzene) used in gasoil to trace fraud. For quantitation we use a sim method (Quantification sim 231 and…
Hello, Software: OpenLab Chemstation edition C.01.09 Software driver version: B.01.07.3[6648] Instrument: GC 7890B, Headspace 7697A I am using the above instrumentation and software. When I attempt to create a sequence/edit sequence table, I get the following…
My Agilent 5110v ICP-OES returns an error message "Timeout in plasma controller state operations (State 7)" or "ErrorNumber_PLASMA_CTRL_BASE_STATE_TIMEOUT" and the plasma fails to lit. Please, what how do I fix the error? I have cleaned the torch, and…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...