Hola! tengo el software chemstation B. 04.03 y necesito saber como realizar la comparacion del espectro de un estándar con el de la muestra para conocer el factor de matcheo. No me aparece el menú "spectra" en el software.
The Digest of upcoming webinars has been updated as of July 17.
Check out the Perfect Your PFAS Workflows webinar series here .
Notable additions include:
PFAS (2)
Check Out:
Analysis of Multiple Elements in Lithium Salts using an Autodilution…
Category/Series
Recorded/Upcoming Date
Recording Link
Atomic
7/23/2024
Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow
Atomic
8/6/2024
Elemental Analysis of Lithium-ion Battery Samples…
Thank you for your reply. I have not worked much with Gas GCs and I am not that familiar with different parts of it. I have performed leak check around front inlet and inside oven compartments (around columns). There was no leak. Could you please show…
The May 2011 issue of Dissolution Technologies ( https://dissolutiontech.com/DTresour/BackIssuefldr/BackIssuesfrmst.html ) compiles a lot of the thoughts of various agencies regarding the use of the alternate MQ procedure. MQ does have acceptance in most…
This is normal as PONA columns are apolar phases with thin films. For your light HC's < C5 either a thick film (ca. 5 µm) or another phase/column would help, but higher HC's cannot be done then (see also Lance's answer). It's either switching or backflushing…
Hi xiangui Are you running different methods in different worklists, or are the worklists all running the same method? I assume the same method across worklists, but this is not clear in your question.
Does this change in pressure lead to a change in…
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
Early Maintenance Feedback is a useful feature on Agilent GC Systems and software that allows a user to monitor the maintenance needed on their GC. This feature allows for users to...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue:
This procedure outlines the steps to view and clear the maintenance warnings on based on Agilent 8890/8860 GCs. You can also follow the onscreen instructions to perform maintenance...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with Agilent MS-40+ rotary vane pump.
Issue
Regular check of the rough pump fluid level in your MS40+ pump as part of regular 6000 LC/MS system maintenance checks.
Steps...
This Information Applies To the Following Products : All Agilent iFunnel and Agilent Jet Stream (AJS) 6400 Series LC/MS triple quadrupole systems, Agilent 6460A/C, 6470A, 6490A, and 6495A/B/C
Issue:
As LC Triple Quadrupole Mass Spectrometers (LC...