Hello,
That looks like Chemstation in the integrator preview window can you relay the version and confirm the table captured. If that is the case these are preliminary results from the integrator preview for final values, I would look at the reports…
Support and educational resources for the Labware Stacker .
Support Documents
G5586A Labware Stacker Site Preparation Checklist
G5407A Labware Stacker Site Preparation Checklist
User Guides
Labware Stacker User Guide
Stacker ActiveX…
GC Inlet Maintenance
Find links and part numbers to the consumables used in the video here.
GC Septum
Inlet septa are used to maintain a leak-free seal at the GC inlet, even after repeated injections.
If the septum has a dimple, the dimple…
Modern labs are constantly looking for opportunities to improve their efficiency and reduce the workload of their staff. Automating repetitive tasks can help to maximize instrument usage and free up operators to perform other tasks, improving overall…
Unless you are strictly matrix matching your calibration standards to your samples, it is best to use an internal standard to account for matrix effects. This is standard practice in ICP-OES. Most people use Yttrium or Scandium, an element that is not…
A new educational page from Agilent’s Liquid Chromatography experts is now available. The brand-new HPLC Fundamentals page is curated specifically for scientists wanting to know more about HPLC technology. It also provides answers for HPLC related frequently…
Hi Raina,
on Carbon columns H 2 will be the first peak closely followed by methane. Like on all PLOT columns overloaded peak shift to smaller retention times, i. e. into your hydrogen signal. There is nothing you can do with this type of column. Hydrogen…
Hello Elei , This is just the normal system pressure as measured by the pressure sensor inside the pump. You can check this from the online or acquisition section of your SW, under the pump status. What SW are you currently using?
This Information Applies To: 1100, 1200 and 1260 Infinity I and 1260 Infinity II LC Pumps (Excluding preparative pumps with electromagnetic purge valve (EMPV): G1361A. Not applicable to any of the 1290 Infinity II modules with automatic purge valve: G4220X...
This Information Applies To: Agilent 1260 Infinity G1315x DAD or G1365x MWD Modules
Issue:
Removing and re-installing Visible and UV lamps in Agilent 1260 Infinity G1315x DAD or G1365x MWD Modules.
Both the visible and UV lamps are consumable...
This Information Applies To: Agilent 1260 Infinity Binary, Quaternary or Isocratic Pumps.
Issue:
Removal of the pump head from the pump metering drive for maintenance on an Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump Module.
Steps...
This Information Applies To: All Agilent 1260 Infinity Binary, Quaternary, or Isocratic Pumps without the Seal Wash Option installed.
Issue:
Worn pump seals can shed small particles that can cause blockages and pressure issues downstream of the...
This Information Applies To: Agilent G7167x Multisampler modules
Issue:
Required when:
The needle seat is visibly damaged, blocked, or is leaking.
Leaks or blockages in the Vialsampler are observed, especially between the needle and needle...
This Information Applies To: Agilent 1260 Isocratic (G1310B) Quaternary (G1311B) Pumps.
Issue
Required when:
The inlet valve is defective.
The pressure or leak test in Lab Advisor suggests the inlet valve may require replacement.
A large...
This Information Applies To: Agilent 1260 Isocratic (G1310B) quaternary (G1311B) pump modules
Issue:
Required when:
The outlet valve is defective or leaking.
The pressure or leak test in Lab Advisor suggests the outlet valve may require replacement...
This Information Applies To: Agilent 1260 Isocratic (G1310B) quaternary (G1311B) pump modules
Issue:
The seal wear in procedure is important as it acts to "bed-in" the seals to ensure a leak free and pressure-tight pump head.
Required when:...
This Information Applies To: Agilent G7167A/B Infinity II Multisamplers
Issue:
The Agilent Multisampler autoreferencing procedure uses predefined positions on the base plate and the sample hotel to calibrate the positioning of the needle parkstation...
This Information Applies To: Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump Modules
Issue:
Reinstallation of the pump head on the pump metering drive during maintenance on an Agilent 1260 Infinity Binary, Quaternary or Isocratic Pump...