Hello MargaretRBaker ,
Compounds can be imported by pasting them in the Acquisition Parameters section of your method. I would recommend manually adding a compound first and then copying and pasting that into your spreadsheet to create a template. Then…
I’m trying to configure the external event connectors #5 (pin 1 and 3) and #6 (pin 2 and 4) to trigger a DAQ. I’m currently testing the flow logging but I am stumped. I have an 8 pin mini DIN from external event output with wires corresponding to pins…
Explore Agilent 5977 GC/MS, 7000E GC/TQ, 7010C GC/TQ, and 7250 GC/Q-TOF resources.
Collection of 5977 GC/MS Resources
Collection of 7000E and 7010C GC/TQ Resources
Collection of 7250 GC/Q-TOF Resources
Are you awaiting the arrival of a new…
Hi I work on qTOF 6546.
Accoring to the "F1- help" in Mass Hunter for 6546 model I can not use the slicer position in high sensitivity mode. The same information was itroduced in one of Agilent webminars.
However on Agilent comminity I got answers…
HI Jheds,
do you use a TOGA Analyzer or have you setup the system yourself? An Analyzer needs retuning of everything after changing a column, etc.
Regards,
Norbert
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...