You should be able to but best to get customer care in your region to confirm they can advise on both options. The MS40 upgrade is the better option if you can go for it.
It depends on what you have installed. There is an upgrade kit. The old-style chambers are no longer available. You may want to contact your local service group.
Also, if too costly maybe upgrade to a newer degasser.
5067-5387 vacuum chamber replacement…
Here's what's new in the latest release of MassHunter BioConfirm Software.
New peptide ECD fragmentation MS/MS capabilities with c and z fragment ion data analysis
Expanded capabilities for linear synthetic peptide analysis
Modernized interface…
The senTorr controller used to have a RS232 Serial communication add-on kit, but it was obsoleted as well as the senTorr gauge controller. The XGS600 is the current Agilent Gauge controller for Ion Gauges. Vacuum Multi-Gauge Controller ATM-XHV, XGS-600…
Generally, you would start method development with what you find in the USP and/or FDA Dissolution Method Databases for volume, media, RPM, etc. requirements. The FDA method database points you to: Dissolution Testing and Acceptance Criteria for Immediate…
That turbo controller and the 300HT turbo pump are obsolete. The RS232 communication kit referenced in the controller manual is also no longer sold by Agilent (previously Varian).
The current model turbo pump of that size is the 305FS turbo. Turbo Pumps…
Hello Kart995,
What vintage is your Bravo, could you please share serial number?
which .dev file are you trying to load did it work on this computer before?
Does the error say "Device type Bravo does not exist"
Are you able to initialize the Bravo…
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Checking and adjusting the nebulizer needle is part of regular maintenance or troubleshooting tasks. It is suggested when there is an issue with nebulizer spray shape or spray...
This Information Applies To: Agilent Single Quadrupole LC/MS systems controlled by OpenLab CDS software
Issue
How to check and recognize the current Instrument Status of your 6100 Series and InfinityLab LC/MS systems using OpenLab CDS software....
This Information Applies To: Agilent LC/MS Systems
Issue
Contamination of the tune mix or the Calibrant Delivery System (CDS) of your LC/MS system can cause Autotune failures and drops in sensitivity due to ion suppression.
Items Required...
This Information Applies To: Agilent LC/MS Systems
Issue
When there is suspected contamination of the CDS, low tune response, or possible blockage in the CDS, flushing the Calibrant system may be required.
Warning : This procedure risks...
This Information Applies To: Agilent LC/MS System
Issue
Instructions on how to check the level of calibrant in your LC/MS system, and refill the calibrant bottle if necessary.
Requirements
Checking the level of calibrant should be performed...
This Information Applies To: Agilent 6100 Series LC/MS Instruments
Issue
Instructions on how to fill the calibrant bottle in Agilent 6100 Series LC/MS Instruments when calibrant levels are running low.
Background
The ability to autotune your...
This Information Applies To: Agilent 6000 Series LC/MS systems
Issue
The article details the correct tuning mix to use according to your LC/MS system and the source type installed on your system. In cases where Agilent tuning mixes need to be diluted...
This Information Applies To: Agilent 7693A, 7650A, and 7683 Series automated liquid samplers
Issue
GC software or GC LED display shows ALS Failure code 245: Autosampler front tower plunger error or ALS Failure Code 945: Auto injector back tower...
This Information Applies To: TapeStation ScreenTapes and reagents
Issue
Using the search tool on Agilent.com to locate the declarations of conformity (DOC) for Agilent ScreenTapes and Test-Tapes, certificates of conformity (COC) for TapeStation...
This Information Applies To: Agilent 7693A Automatic Liquid Sampler
Issue:
The Automatic Liquid Sampler (ALS) system calibration process aligns the sample tray with the injector turret position to enable vial transfers without incident.
Calibration...