GC Inlet Maintenance
Find links and part numbers to the consumables used in the video here.
GC Septum
Inlet septa are used to maintain a leak-free seal at the GC inlet, even after repeated injections.
If the septum has a dimple, the dimple…
Modern labs are constantly looking for opportunities to improve their efficiency and reduce the workload of their staff. Automating repetitive tasks can help to maximize instrument usage and free up operators to perform other tasks, improving overall…
Unless you are strictly matrix matching your calibration standards to your samples, it is best to use an internal standard to account for matrix effects. This is standard practice in ICP-OES. Most people use Yttrium or Scandium, an element that is not…
A new educational page from Agilent’s Liquid Chromatography experts is now available. The brand-new HPLC Fundamentals page is curated specifically for scientists wanting to know more about HPLC technology. It also provides answers for HPLC related frequently…
Hi Raina,
on Carbon columns H 2 will be the first peak closely followed by methane. Like on all PLOT columns overloaded peak shift to smaller retention times, i. e. into your hydrogen signal. There is nothing you can do with this type of column. Hydrogen…
Hello Elei , This is just the normal system pressure as measured by the pressure sensor inside the pump. You can check this from the online or acquisition section of your SW, under the pump status. What SW are you currently using?
Hi MSVS , My pleasure to assist. Thank you for letting us know that you were able to configure successfully using the steps. I am glad to hear that we now have the solution to this case.
The Digest of upcoming webinars has been updated as of May 29.
Notable additions include:
GC & GCMS (1)
OMICS (1)
Check Out:
EPA 200.8 Water ICP-MS Analyzer – Learn How This Integrated Package Ensures Your Lab is Up and Running Samples…
Soap and water or Snoop type leak detection fluids are not recommended to be used on GC or GC/MS gas connections. If gas is leaking out, gas is also leaking in - that's why a leak in the helium line will show as air in the background. That means that…
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Checking and adjusting the nebulizer needle is part of regular maintenance or troubleshooting tasks. It is suggested when there is an issue with nebulizer spray shape or spray...
This Information Applies To: Agilent Single Quadrupole LC/MS systems controlled by OpenLab CDS software
Issue
How to check and recognize the current Instrument Status of your 6100 Series and InfinityLab LC/MS systems using OpenLab CDS software....
This Information Applies To: Agilent LC/MS Systems
Issue
Contamination of the tune mix or the Calibrant Delivery System (CDS) of your LC/MS system can cause Autotune failures and drops in sensitivity due to ion suppression.
Items Required...
This Information Applies To: Agilent LC/MS Systems
Issue
When there is suspected contamination of the CDS, low tune response, or possible blockage in the CDS, flushing the Calibrant system may be required.
Warning : This procedure risks...
This Information Applies To: Agilent LC/MS System
Issue
Instructions on how to check the level of calibrant in your LC/MS system, and refill the calibrant bottle if necessary.
Requirements
Checking the level of calibrant should be performed...
This Information Applies To: Agilent 6100 Series LC/MS Instruments
Issue
Instructions on how to fill the calibrant bottle in Agilent 6100 Series LC/MS Instruments when calibrant levels are running low.
Background
The ability to autotune your...
This Information Applies To: Agilent 6000 Series LC/MS systems
Issue
The article details the correct tuning mix to use according to your LC/MS system and the source type installed on your system. In cases where Agilent tuning mixes need to be diluted...
This Information Applies To: Agilent 7693A, 7650A, and 7683 Series automated liquid samplers
Issue
GC software or GC LED display shows ALS Failure code 245: Autosampler front tower plunger error or ALS Failure Code 945: Auto injector back tower...
This Information Applies To: TapeStation ScreenTapes and reagents
Issue
Using the search tool on Agilent.com to locate the declarations of conformity (DOC) for Agilent ScreenTapes and Test-Tapes, certificates of conformity (COC) for TapeStation...
This Information Applies To: Agilent 7693A Automatic Liquid Sampler
Issue:
The Automatic Liquid Sampler (ALS) system calibration process aligns the sample tray with the injector turret position to enable vial transfers without incident.
Calibration...