Hi Monty,
Could you provide a little more information on this? Are you talking the bias created when using weighted fit, or is there an issue in the low count standards compared to the rest of the curve?
What plasma condition are you in: Low Matrix;…
Hello,
Have you been able to resolve this?
The cones do not affect the pressure required to get the instrument turbo pump to come on and get to standby mode. They only become an issue when lighting plasma and when the interface valve opens.
Most…
Never mind, just discovered how.
For future reference, right-click over the samples and select "Reject Settings", a pop-up appears allowing to select which replicates to reject.
And moved again to the forum where it belongs :-)
Hi ByCoder,
if you want reproducible results NEVER clean liners and reuse them. Any cleaning process will remove the deactivation layer for GC/MS (UI) liners, glass wool has a different deactivation…
The Digest of upcoming webinars has been updated as of March 13.
Notable additions include:
BioPharma (1)
Cell Analyis (2)
Chromatography and Mass Spec (1)
Food Testing (1)
Check Out:
Jet Fuel by ICP-MS on March 19
OligoConnect:…
This Information Applies To: Agilent GC Systems
Issue
Excessive baseline noise can be introduced at different points including sample preparation, sample introduction, separation, and the detector. The excessive background can cause reduced signal...
This Information Applies To: Agilent GC Systems
Issue
Baseline instability that is not reproducible across multiple runs can be introduced at different points including sample introduction, separation, and the detector. The baseline instability...
This Information Applies To: Agilent GC Systems
Issue
Peak fronting is present in a chromatography peak when it has an excessive asymmetry with a leading edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...