Dear Agilent, We are at the moment experience trouble regarding initialization of Chemstations rev. C.01.07 [27] to 7890B GC`s on a couple of Windows 7 computers. Please see attached message box. We are able to ping both 7890B GC instruments. In config…
Hi I am new to GC Method development phase. We are having GC 7820 A with FID detector. Currently I am developing a method for industrial solvents. When I run a blank (THF), I got a very unusual spikes in the chromatogram as seen below. I have changed…
Hello, I am having the same problem when trying to log into Chemstation: Configuration system failed to initialize. Chemstation will shutdown now. I have tried to rename or delete the user.config as explained before (following the Win7 steps), but I cannot…
Good day, Wondering if anyone can help as Agilent phone support will not. Trying to install OpenLAB CDS Chemstation C.01.07 SR3 onto a Windows 10 machine (their support did tell me that version is supposed to be supported on Windows 10). But when it tries…
I think it is something linked to Excel. I was able to turn on the alerts for the log so the basic program is working but trying to open the log fails with no errors. Starting acq does create a popup that it failed to write to the log but every thing…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Fragment Analyzer controller software
Issue:
Over time the dynamic coating polymer on the capillaries needs to be refreshed. Failure to do so can lead to a loss of performance. Indicators...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
Elevated doubly charged values that are greater than 3% for x-lens configuration or greater than 7% for s-lens configuration, can be caused by contamination, or an...
This Information Applies To: Agilent 6200 Series TOF and 6500 Series Q-TOF Systems
Issue
Instructions on how to correctly dilute the tune mix for 6200 Series TOF and 6500 Series Q-TOF systems depending on source type.
Background
If the Tune...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0
Issue
The Agilent MassHunter Qualitative software can generate qualitative analysis reports, which may include sample chromatogram information and sample...
This Information Applies To: Agilent MassHunter Qualitative Analysis Software version 10.0 or higher
Issue
Identifying compounds using a spectral library is essential in qualitative analysis. This article will describe how to load a data file and...
This Information Applies To: Agilent ICP-MS Systems
Issue
The Helium cell gas line on the ICP-MS may be contaminated with air and moisture in case of a tank replacement, or if the instrument was not used for an extended amount of time. Purging the...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The Calibration Curve window tools help with setting an appropriate calibration curve for each compound in the calibration table.
The Calibration Curve window...
This Information Applies To: Agilent MassHunter Quantitative Analysis "Quant-My-Way" user interface (version B.09.00 or later)
Issue
To process the data files in the batch and obtain quantitative results, you must either create a new quantitative...
This Information Applies To: Agilent MassHunter Qualitative and Quantitative Analysis
Issue
Calculation of signal-to-noise in MassHunter is done using the same routine for both Qualitative and Quantitative Analysis. However, there are differences...
This Information Applies To: Agilent GC/MS MassHunter Data Acquisition Software
Issue
Multiple samples can be run without user intervention using an Automated Liquid Sampler (ALS) in combination with a Sequence.
Users can perform simple edits...