Kevin,
Just to add a follow-up here-there can be many reasons for a slow-down, including the following, which I would suggest you check first:
A slowdown may indicate a few things:
Running with less than 8GB RAM on the PC (older workstations…
CONTINUE THE CONVERSATION - Ask questions of the speaker here in the community FULL TITLE: Transitioning to the New Elemental Impurity Regulations; Advances in Atomic Spectroscopy For USP <232>/<233> and ICH Presented by Emmett Soffey, Agilent Technologies…
there is ISTD response % deviation
this calculate the deviation percent from you calibrants.
example : 3 cal samples with avg istd peak area 10000
then any sample added in the batch table will be calculated
you can set you min deviation for example…
GCMSD MassHunter Installation guide answers many of the basic questions that we receive at Agilent via emails and phone calls. The guide can be used to verify PC requirements, operating system, and how to prepare a PC and instrument for a new software…
Hi Alex ..
There is no such feature in MicroLab PC software, You can use MicroLab Expert if you have it..
Attaching MicroLab Expert Software Manual for your reference. Also, For calculation of Derivatives you will need to use MicroLab Expert Base…
This Information Applies To: Agilent GC systems with Gas Clean Filter
Issue
If you have determined that the Gas Clean Filter is saturated, it mus be replaced (see the article When to Replace the Gas Clean Carrier Gas Filter ).
The steps described...
This Information Applies To: Agilent GC Systems 8890/8860/Intuvo 9000 /7890/7820/6850/6890
Issue
General guidance on GC column flow rates, outlining the correct column flow rate for optimal compound separation depends on the column internal diameter...
This Information Applies To: Agilent GC Method Translator
Issue
Detailed instructions on translating methods using the GC Method Translator.
Background
For ideal use of cases and applications with the GC Method Translator, see the article...
This Information Applies To: Agilent Solvent Vent Calculator
Issue
The Solvent Vent Calculator estimates the Agilent solvent vapor exit (SVE) accessory valve timing based on solvent type, oven temperature, vent flow, and pressure.
Background...
This Information Applies To: Use of the Agilent GC Method Translator
Issue
How to correctly use the GC Method Translator to convert a method to suit a different GC configuration or to optimize a method.
Background
The GC Method Translator...
This Information Applies To: GC Pressure Flow Calculator
Issue
Instructions for the correct use of the Pressure Flow Calculator.
Background
The Pressure Flow Calculator uses the column dimensions, oven temperature, and detector outlet pressure...
This Information Applies To: The Agilent GC Vapor Volume Calculator.
Issue
The Vapor Volume Calculator determines the vapor volume based on the injection volume, solvent type, inlet head pressure, and the inlet temperature. This calculated vapor...
This Information Applies To: Agilent GCs
Issue
Agilent provides free GC calculators and tools to assist with method development.
Background
Tips : The calculators are available for downloading at Agilent.com .
Vapor Volume...
This Information Applies To: Agilent GC Systems
Issue
The Agilent Gas Clean Carrier Gas Filter delivers faster stabilization times for increased GC productivity, removes oxygen, moisture, and hydrocarbons from the carrier gas for MS applications...
This Information Applies To: Agilent GC systems
Issue
When a GC heater cannot reach setpoint, or taking too long to reach setpoint, the GC will enter a "Thermal Shutdown" (or similar heater error) state to protect itself. This state will turn off...