Hello MargaretRBaker ,
Compounds can be imported by pasting them in the Acquisition Parameters section of your method. I would recommend manually adding a compound first and then copying and pasting that into your spreadsheet to create a template. Then…
I’m trying to configure the external event connectors #5 (pin 1 and 3) and #6 (pin 2 and 4) to trigger a DAQ. I’m currently testing the flow logging but I am stumped. I have an 8 pin mini DIN from external event output with wires corresponding to pins…
Explore Agilent 5977 GC/MS, 7000E GC/TQ, 7010C GC/TQ, and 7250 GC/Q-TOF resources.
Collection of 5977 GC/MS Resources
Collection of 7000E and 7010C GC/TQ Resources
Collection of 7250 GC/Q-TOF Resources
Are you awaiting the arrival of a new…
Hi I work on qTOF 6546.
Accoring to the "F1- help" in Mass Hunter for 6546 model I can not use the slicer position in high sensitivity mode. The same information was itroduced in one of Agilent webminars.
However on Agilent comminity I got answers…
HI Jheds,
do you use a TOGA Analyzer or have you setup the system yourself? An Analyzer needs retuning of everything after changing a column, etc.
Regards,
Norbert
This Information Applies To: Agilent GC systems with Gas Clean Filter
Issue
If you have determined that the Gas Clean Filter is saturated, it mus be replaced (see the article When to Replace the Gas Clean Carrier Gas Filter ).
The steps described...
This Information Applies To: Agilent GC Systems 8890/8860/Intuvo 9000 /7890/7820/6850/6890
Issue
General guidance on GC column flow rates, outlining the correct column flow rate for optimal compound separation depends on the column internal diameter...
This Information Applies To: Agilent GC Method Translator
Issue
Detailed instructions on translating methods using the GC Method Translator.
Background
For ideal use of cases and applications with the GC Method Translator, see the article...
This Information Applies To: Agilent Solvent Vent Calculator
Issue
The Solvent Vent Calculator estimates the Agilent solvent vapor exit (SVE) accessory valve timing based on solvent type, oven temperature, vent flow, and pressure.
Background...
This Information Applies To: Use of the Agilent GC Method Translator
Issue
How to correctly use the GC Method Translator to convert a method to suit a different GC configuration or to optimize a method.
Background
The GC Method Translator...
This Information Applies To: GC Pressure Flow Calculator
Issue
Instructions for the correct use of the Pressure Flow Calculator.
Background
The Pressure Flow Calculator uses the column dimensions, oven temperature, and detector outlet pressure...
This Information Applies To: The Agilent GC Vapor Volume Calculator.
Issue
The Vapor Volume Calculator determines the vapor volume based on the injection volume, solvent type, inlet head pressure, and the inlet temperature. This calculated vapor...
This Information Applies To: Agilent GCs
Issue
Agilent provides free GC calculators and tools to assist with method development.
Background
Tips : The calculators are available for downloading at Agilent.com .
Vapor Volume...
This Information Applies To: Agilent GC Systems
Issue
The Agilent Gas Clean Carrier Gas Filter delivers faster stabilization times for increased GC productivity, removes oxygen, moisture, and hydrocarbons from the carrier gas for MS applications...
This Information Applies To: Agilent GC systems
Issue
When a GC heater cannot reach setpoint, or taking too long to reach setpoint, the GC will enter a "Thermal Shutdown" (or similar heater error) state to protect itself. This state will turn off...