Attend our second GC Live virtual event on Thursday, April 11 at 11:00 a.m. EST to learn about the extensive suite of troubleshooting and diagnostic tools that are built into Agilent intelligent GC systems. These can be accessed locally using the instrument…
Join our inaugural GC Live virtual event on Thursday, February 15 at 11:00 a.m. EST to learn how the intelligent features of Agilent 8890 and Intuvo 9000 GC systems can be used through their digital interfaces. An integrated touchscreen allows access…
The Digest of upcoming webinars has been updated as of February 6.
Notable additions include:
LC & LCMS (3)
OMICS (1)
Check Out:
Part 3: The Mining Lifecycle and Elemental Analysis Workshop Series on February 13
Acceptability and Antioxidant…
Hello,
You cannot store anything but numeric values in variables and aggregators for IR. You could create your own public array in custom code or a dll where you can store and recall the values as needed. A customer wanted to be able to display in…
Mike,
It is possible in later versions, but I think in 2.5 that may not be available. If you do not see it in the list, then it was not added to that version. You can use CC to back calculate the values from the compound amount, concentration, multiplier…
It was on the equipment, you can check to be sure by running a performance check on the chiller. Our chiller passed all points on the performance check but failed on the ICP system.
Hi Ajgor,
I am trying to something very similar to what you were doing with your 6890. I have been having some issues getting a response from the machine (using a HyperTerminal PuTTY) and was wondering if you had any tips for troubleshooting this. …
This Information Applies To: Agilent 7890/7820 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent LC pumps
Issue:
Stuck or obstructed check valves (Active Inlet Valve (AIV), Passive Inlet Valve (PIV), Outlet Ball Valve (OBV)) can cause issues such as no-flow or no-pressure, moderate to strong drops in pressure...
This Information Applies To: Agilent 1260 Infinity II multisampler, 1290 Infinity II multisampler, 1260 Infinity II SFC multisampler, and 1260 Infinity II bio-Inert multisampler
Issue
The needle bends while moving to the wash port or showing one...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the step-by-step instruction on how to overlay chromatograms for OpenLab CDS 2.x
Steps to Follow
Load data from result sets or single samples. See Load or add...
This Information Applies To: Agilent Lab Advisor Software, Agilent Multicolumn Thermostat
Issue:
Agilent Lab Advisor is a great tool to diagnose the issue of your HPLC. Running the tests that are relevant to your specific issue in the Service &...
This Information Applies To: Agilent OpenLab CDS (ver 2.x)
Content:
The following procedure shows how to review completed injections in a running sequence in OpenLab CDS (ver 2.x).
Steps to Follow:
Select the sequence from the Run Queue...
This Information Applies To: Agilent Liquid Chromatography (LC) systems
Issue:
Shutting down the HPLC for a long period requires following this general procedure to prevent damage to the system and the column.
Steps to follow:
Store the...
This Information Applies To: Agilent G7129A/B Autosampler with Sample Thermostat/Cooler G7167-60101 or G7167-60005.
Issue:
The autosampler may stop working from time to time, potentially giving off loud noises and switching off the light. The only...
This Information Applies To: Agilent 5977A/B GC/MSD with EI source, EI Extractor Source, or CI Source.
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte...