Thank you for all your suggestions, this is what I have done so far, With computer disconnected from our Network (to eliminate firewall issues, as per recommended by or IS/IT department): Both instruments connected through hub - failed Only 6850 connected…
We have been using an Agilent 7890B GC-MS with FID TCD equipped with an autosampler (ALS) for analysing liquid hydrocarbon samples. I would like to analyse gaseous samples of CO, CO2 and H2 in the future. Is it possible to manually inject gas samples…
I am new to Agilent forum, We got a new GC 7820 with FID detector. I am using Open Lab CDS chemstation Ver 2.2, if you upload video turorials for this version that would be really helpful. For your information I got about e familiarisation disk, but I…
Hi, Thanks a lot for your great help. However, how to use "Import worklist" function to import entries into the user defined " Amt. and Tot. Amt. " column? Other info are import succesfully except the two ones. I tired " Amt.","Tot. Amt. " in the importing…
Hello Guys, I am using Agilent 7890a GC with an FID detector. Last week I saw that there are few ghost peaks in my chromatogram, so I decided to bakeout the column. After baking the ghost peaks disappeared but now I see and increase in the peak towards…
Hi, There are so many open questions, that i would ask you to run thorugh the "Troubleshooting Tool". It´s an guided pdf, which helps to identify the problem. The last performance report looks quite well, also the torch axis and the em tuning run without…
Hi galderson,
that's a typical "it depends" answer. For the carrier gas line I assume you use at least a 5.5 or even 6.0 gas quality? Anyway depending on the gas quality there are different concentrations of impurities:
Now you need to…
I have GC-7890B -TCD -FID . I want to maintain the flow of gas sample to be same as calibration gas flow . Are there any option in GC to give same flow of sample and calibration gas or shall i use flow meter at the outlet of GC .
Thank you for your help, Paul. I'm not sure what happened on October 27. Many people use this system.
This morning, the system passed the Tune Evaluation, but the HiVac is still off. I looked at the Manual Tune task box, but do not see where I have…
Thank you James, The software that we have, runs in a very old HP computer with Windows 2000 PRO. The equipment´s software only runs in this computer and it has had many fails lately. For it reason, we would like to buy an updated software that it can…
This Information Applies To: Agilent 8890/8860 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with MS40+ rotary vane pumps
Issue
Instructions on how to replace the filter in an Agilent MS 40+ pump as part of annual pump maintenance
Background
The filter in the...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900) with ICP Expert 7.5.x Software
Issue
The Recommended Routine Maintenance Schedule does not adjust for the number of samples analyses or the sample matrix, both of which...
This Information Applies To: Agilent 7890/7820 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent LC pumps
Issue:
Stuck or obstructed check valves (Active Inlet Valve (AIV), Passive Inlet Valve (PIV), Outlet Ball Valve (OBV)) can cause issues such as no-flow or no-pressure, moderate to strong drops in pressure...
This Information Applies To: Agilent 1260 Infinity II multisampler, 1290 Infinity II multisampler, 1260 Infinity II SFC multisampler, and 1260 Infinity II bio-Inert multisampler
Issue
The needle bends while moving to the wash port or showing one...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the step-by-step instruction on how to overlay chromatograms for OpenLab CDS 2.x
Steps to Follow
Load data from result sets or single samples. See Load or add...
This Information Applies To: Agilent Lab Advisor Software, Agilent Multicolumn Thermostat
Issue:
Agilent Lab Advisor is a great tool to diagnose the issue of your HPLC. Running the tests that are relevant to your specific issue in the Service &...
This Information Applies To: Agilent OpenLab CDS (ver 2.x)
Content:
The following procedure shows how to review completed injections in a running sequence in OpenLab CDS (ver 2.x).
Steps to Follow:
Select the sequence from the Run Queue...