Cary 5000: 9:128Write timeout

Dear Mike,

thank you for your assistance. After reinstalling the cables and powering the system, the initialization of the instrument fails with all kinds of errors:

9:9614NMP:E9614 8031 timeout

9:9604NMP:E9604 Microm datum

9:9328SEQ:E9328 fatal initialisation

9:9610NMP:E9610 stepper int busy

9:64 Read time out

As you said, this does not seem to be easily fixable and a service technician is requested, I appreciate your help though!

Kind regards 

Onsite service is required for this repair.  It's likely the micrometers will need to be replaced.

Onsite service is required for this repair.  It's likely the micrometers will need to be replaced.