Bonjour
Où je peux trouver des video pour se former sur l'utilisation de gc ms avec le logiciel masshunter version 10 que nous avons récemment acheté
Merci
Find maintenance, best practice, and troubleshooting articles.
Bonjour
Où je peux trouver des video pour se former sur l'utilisation de gc ms avec le logiciel masshunter version 10 que nous avons récemment acheté
Merci
Hi HAFEDH welcome to the Community.
I’ve used an online tool to translate your post. English is the official language of the Agilent Community, and the platform does not support translating a post from local language to English. You can view pages in your local language by clicking the “globe” icon in the upper-right corner and selecting your language. Learn more Agilent Community Translation - Community Help - Getting Started - Agilent Community.
See translation of the original post below.
Where I can find videos to learn how to use gc ms with the MassHunter Version 10 software we recently purchased?
Cheers,
Kristen
You didn't specify what model MSD you are using, but here are some places to start:
Collection of 5977 GC/MSD Resources - Wiki - GC/MS - Agilent Community There are manuals, application notes, and videos. (If you are running Triple Quad or QTOF, look at the Table of Contents along the left side for specific resources.)
Agilent Technologies (viewcentral.com) This is Agilent University's learning path for "Agilent 5977 GC/MSD with MassHunter Workstation." (For Triple Quad, select "Learning Paths" at the top and then "GC/MS Learning Paths." A new page will open and there will be a selection for "Agilent 7000 or 7010 Triple Quadrupole GC/MS with MassHunter Workstation.)
In the MassHunter software box, one of the USB drives is labeled "Software User Info" or something similar. You can install that to access familiarization guides.