Unknowns Analysis - is it possible to see what Blank was subtracted?

Hello rokimet ,

From what I have been able to find there is not a way to see which blank was used for blank subtraction in UA. In testing with the data that I have available, if multiple blanks are run only the last blank that is processed is used to set the cut-off limit for the blank subtraction of all samples. In UA blank subtraction is more of a filtering option as no signal subtraction is performed. The blank subtraction settings only determines whether or not the component will be reported as being found.

Thank you Howard, that's good to know. Thankfully, I didn't have quite enough messy blanks to test it myself! 

Thank you Howard, that's good to know. Thankfully, I didn't have quite enough messy blanks to test it myself!