Combined Compound List and Integration Peak List (Qual B.07.00 SP1)

Hi dpii ,

I apologize for the delayed response. In reviewing Community posts, I found that your question had not been addressed.

While you can add some of the peak information, such as area and height, to the compound table and then simply export that, there aren't any reports or any other options to combine that information in qual.

One option that does work for some customers is to utilize Unknowns Analysis and its included area percent report. You can see a discussion of that in this post.

(+) Custom report using mass hunter report builder - Mass Spectrometry Software User Forum - Mass Spectrometry Software - Agilent Community

One issue in your case though may be that these template did not exist in the B.07.x version of UA. I'm not certain exactly when the templates were added but you would probably need at least quant B.08 or B.09 for UA to have that report. 

Hi howard_sanford,

Thank you for the reply. Do you know if Unknowns Analysis can handle chromatograms and data from detectors other than the TIC? For instance UV data from the DAD1 detector, or analog-to-digital converted input data in the UIB channel.

Hi howard_sanford,

Thank you for the reply. Do you know if Unknowns Analysis can handle chromatograms and data from detectors other than the TIC? For instance UV data from the DAD1 detector, or analog-to-digital converted input data in the UIB channel.

dpii ,

The latest versions can perform 'TIC analysis' of most signal types. You need to manually specify the scan/signal type for analysis.

The options for processing non-MS data are limited. You can create a RT only library and identify components that way. Once you have hits you can also use the conc. estimation features and would be able to generate any of the UA style reports if desired.