Software for Agilent 6410B MS

Hello,

 

We just acquired our First MS for our 1200 HPLC.   

 

It is the Agilent 6410B.

 

Can we use Chemstation for the MS or do we have to buy the MassHunter Software?

 

Any help or direction or suggestions or advice would be greatly appreciate.........

 

We are a small lab so we are trying to figure this out.

 

Thank You in advance for your help.

Parents
  • No Problem. The only revs that are not compatible is B.07 and rev10 Acquisition.

  • Questions for you ......since you are very knowledgeable ........ and before I make a purchase.

     

    Does this Masshunter Workstation software B.09.00 come with all of the software that is needed for the 6410B Mass Spec?

     -   Acquistion 

    -   Qual

    -   Quant?

     

    Also, if the Software Box is still Factory Sealed .... would you believe that the Software License  Numbers are in the box that I will need to use it like on the HPLC Chem station Software?

     

     

    Thank You so much for help.

Reply
  • Questions for you ......since you are very knowledgeable ........ and before I make a purchase.

     

    Does this Masshunter Workstation software B.09.00 come with all of the software that is needed for the 6410B Mass Spec?

     -   Acquistion 

    -   Qual

    -   Quant?

     

    Also, if the Software Box is still Factory Sealed .... would you believe that the Software License  Numbers are in the box that I will need to use it like on the HPLC Chem station Software?

     

     

    Thank You so much for help.

Children
  • The MassHunter Workstation Software MH SW Kit B.09.00 LC/TQ contains the following:

     

    · G3335-60189: 6400 Series LC/TQ Resource DVD

    · G3335-60191: MH Acq SW DVD B.09.00 Triple Quad LC/MS

    · G3335-90253: 6400 Series LC/TQ Quick Start Guide

    · G3336-60105: MH Quant B.09.00 SW 32GB USB Flash Drive

    · G3336-60108: MH LCMS Supp. SW CD B.09.00

    · G3336-60109: MassHunter Offline Utilities B.09.00 CD

    · G3336-60116: MassHunter Analysis Resource DVD DEC2017

    · G3336-60117: MassHunter Qual DA SW UFD B.08.00 SP1

    · G3336-60138: MH PCDL Manager SW CD B.08.00 SP1 Update

    · G3337-60251: LCQQQ MH Workst Auth Code

    · G6845-60008: MassHunter Reporting Training Disk

    · G6845-60088: MassHunter GCMS Supp CD B.07.06


    A new, unsealed "blue box" purchased directly from Agilent will have the entitlement codes in the box necessary to be sure your software is properly licensed.

     

    Chemstation is sold and licensed independently of MassHunter, so the box will not contain any Chemstation licenses, nor do the Chemstation licenses work for MassHunter and vice versa.  Your Agilent LC can be fully controlled by MassHunter, though it may be necessary to update the firmware.

     

    Hope this helps!

  • Thank You.

     

    You did a great job answering my questions.

     

    Have a super day.

  • You don't need the Instrument Driver package, as MassHunter will run the HPLC.

    If your computer is connected to the Internet, you should be able to update Lab Advisor from within the application.

    Start Lab Advisor, then click on "Apps" in the menu on the upper left hand side.  You should be prompted to get new updates:

    Click on Go to Add ons, highlight Agilent Lab Advisor, then click Check online for updates:

    Then, with the Lab Advisor row highlighted, click update.  (In the screen shot below, I've selected a different program because my Lab Advisor is the current version; this is just an example to show you where the buttons are):

  • Hello,

     

    You were so helpful and a wealth of  knowledge that I thought I would ask you some other questions.

     

    We are getting ready to put our 6410B MSMS on line with our LC system.   

     

    Currently  our HPLC is running Lab Advisor version B.0203 on a Windows 7 machine.

     

    Now, we got a new computer for the system which is windows 10.

     

    The Mass hunter Software I have is:  The MassHunter Workstation Software MH SW Kit B.09.00 LC/TQ

     

     

    The question is what software am I going to use for the HPLC and which will work with the Masshunter Software and will work on Windows 10.

     

     

    The Lab Advisor Version B.0203 which we currently run ..... is installed on a computer but I can't find the installation or media disc.   Not sure if the system was just upgraded from a lower version of Lav Advisor.

     

     

    But I also have the following:

    -  Agilent Lab Advisor B.01.03 SP4 which if have the media discs

     

    -  OpenLab CDS inst Driver for Agilent LC.   I have the License number or Authorization Code but I can't find the Discs or Media.

     

     

    So, I am asking if I can use anything I have?   If I have License or Authorization Code can I request new Media Discs?     Or if I can use the software that we are currently using is there a way to transfer it to a different computer?

     

     

    I am sure I confused you .......... because I confuse myself.... lol

     

     

    Looking for your very informative reply.

     

     

    Thank You 

     

     

  • Will we still be able to use the HPLC without the MSMS?

  • Yes, you can run the LC through MassHunter. Just set the QQQ to not acquire in the method.

Was this helpful?