I am having trouble in stabilizing my RID detector. Please provide me proper procedure for stabilization and getting good baseline in RID. Also when i am joining the column or removing the column there is no effect on the RID baseline.
Find maintenance, best practice, and troubleshooting articles.
I am having trouble in stabilizing my RID detector. Please provide me proper procedure for stabilization and getting good baseline in RID. Also when i am joining the column or removing the column there is no effect on the RID baseline.
I recommend using a large bottle of solvent, ie a gallon of water instead of a liter. This will allow the solvent to be more resistant to temperature changes.
I disagree with that statement completely! By using a gallon of water, you create a nice place for algae to grow and then you pump it trough the RID. Not to mention the weight of such bottle.
Yeah notice I didn't say "..and keep that bottle exposed to light and let the water sit for weeks on end."
Consider RI for water v. temperature and the y axis units of the RID. My opinion was developed over years of working on RIDs, including many successful RID OQs with less than ideal environmental conditions.
Yeah notice I didn't say "..and keep that bottle exposed to light and let the water sit for weeks on end."
Consider RI for water v. temperature and the y axis units of the RID. My opinion was developed over years of working on RIDs, including many successful RID OQs with less than ideal environmental conditions.