I want to have the pumps retain the last flowrate from the method and NOT load initial conditions.
I am using Chromeleon 7.3 with a 1290 pump and vial sampler. I would be happy to hear how Chemstation does it too (as maybe it will help somehow).
With Chromeleon 6.8 I was able to have my pumps lower to 0.1mL/min by setting the flow using a trigger. I tried that here and it always loads the initial flowrate after the method. The idea of returning to initial seems so backwards to me there has to be a way around that.
I ask because this is a walkup instrument for chemists. So, a 'shutdown' or 'standby' method solution will not work. The alternative would be to have the flow change PRIOR to inject. BUT I can't get it to do that. It always wants to adjust flow AFTER inject.
I have tried setting the initial flow to 0.1 mL/min. THen at time 0.00 1mL/min. However, it waits until after the injection to apply this. If I move the command it changes my initial to 1mL/min.
Thank you