Use Agilent Binary Pump with Empower 3


I am trying to use Agilent Binary Pump (1200 series) as a second pump with Waters Alliance system and Empower 3 software. My current set up is as follows:

Alliance system is configured in Empower 3. I have this 1200 series pump that I wanted to use for a post column derivatization. Currently I can use this pump using autopilot but can't control using the Empower 3. I wanted to see if someone can help me to configure the Agilent pump within Empower 3.

Thank you in advance.

Parents Reply Children
Was this helpful?