Does anyone have any experience with AGilents Load and Lock prep column system? Used for loading your own prep columns with bulk support? Are these easy to use? Comparable to purchasing prepacked prep columns?
Thanks!!!
Find maintenance, best practice, and troubleshooting articles.
Does anyone have any experience with AGilents Load and Lock prep column system? Used for loading your own prep columns with bulk support? Are these easy to use? Comparable to purchasing prepacked prep columns?
Thanks!!!
Yes. They are easy to use. Columns will last longer than pre-packed and will maintain high performance through it’s entire lifetime.
Approx. 25% higher loading than pre-packs or competitor’s pack your own.
Equal to or better performance than pre-packs or competitor’s pack your own.
Cost savings will be dependent on how often one goes through columns and time savings due to less runs per campaign.
Here is more info that may be helpful to you as well.
Yes. They are easy to use. Columns will last longer than pre-packed and will maintain high performance through it’s entire lifetime.
Approx. 25% higher loading than pre-packs or competitor’s pack your own.
Equal to or better performance than pre-packs or competitor’s pack your own.
Cost savings will be dependent on how often one goes through columns and time savings due to less runs per campaign.
Here is more info that may be helpful to you as well.
1. Can you please help me with the PN for the first-time order of 500 × 27 mm column?
2. Without MultiPacker Station is it possible to pack the column?
3. which Items are included in a spare parts kit?