• State Verified Answer
  • Replies 14 replies
  • Answers 1 answer
  • Subscribers 93 subscribers
  • Views 4359 views
  • Users 0 members are here
Related

Agilent Knowledge Portal

Find maintenance, best practice, and troubleshooting articles.

Agilent Knowledge Portal

Report to calculate RRT and rank

t0by

Hi all,

Just quickly I'm using OpenLAB CDS Acquisition version 2.3 and running SEC on a predefined method.

I was hoping to be able to add ranks to the report. We assign samples that we run a grade (A / B / C / D...) based off pre-defined constant values. This is based off of RT and % peak. As well as the ranks, I'd also like to have a column in the report that gives RRT relative to a sample that is also run within the same experiment.

Could someone point me in the right direction, I'm fairly familiar with coding so once I know where I'm looking I might be alright.

Thanks,

Toby

Parents
  • 0

    Andy

    Apologies I think I may have confused things more,

    I merely meant to say that our reference is its own injection at the start of the sequence (we also run it intermittently through the sequence) however I just meant to clarify that the reference was not mixed with a sample in that first injection, but on its own.

    So a second table, filtering using Sample_Name, save the retention time as a variable, apply it to the other table in the report and use a custom calculation?

    Is there anything I could do to clarify the situation from your end?

    Thank you very much,

    Toby

  • 0 in reply to t0by

    Toby

    I think that sounds like you're on the right track.

    Can you explain to me how you want to report the data for each of the samples?  Are there multiple peaks in the samples?

    I'm creating an example results set from the Agilent-supplied example data and I'll build a report and share screenshots with you, to illustrate how I would go about this.

    Would that help?

    Andy

Reply
  • 0 in reply to t0by

    Toby

    I think that sounds like you're on the right track.

    Can you explain to me how you want to report the data for each of the samples?  Are there multiple peaks in the samples?

    I'm creating an example results set from the Agilent-supplied example data and I'll build a report and share screenshots with you, to illustrate how I would go about this.

    Would that help?

    Andy

Children
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help