A New GC/MS was installed in our lab .GC 7890A with MSD 5975C but Run mode is always on control panel with or without software control .
Find maintenance, best practice, and troubleshooting articles.
A New GC/MS was installed in our lab .GC 7890A with MSD 5975C but Run mode is always on control panel with or without software control .
The LCP status messages are on page 53-57 in the 5975 Operations Manual which can be found at: 5975 Series MSD Operation Manual (agilent.com)
Hi, Even without MSD and without Auto-sampler the status on Gc is Run in progress
Hi
Can you share picture of control panel display to understand better..
TRAY to install the new fresh copy of software
I did but still Run in progress .