Data System Not Ready


I'm running GC8890/HS7697A
My first injection is setting up fine and my second injection is being placed in the HS analyzer as it should be. My error is coming up when it's time for the second injection to inject into the GC. DATA SYSTEM NOT READY comes up on the interface and the run is aborted. I'm also not getting a data file for the first injection. It's as if the computer/hardware still thinks the previous injection is still going and thus isn't ready to start and accept the next run (even though the instrument parameters are set for it). Any advice if you've encountered this would be greatly appreciated!



Was this helpful?