Any help to resolve this error.
Restarting done.
Plunger replaced.
Syringe replaced.
But still this error coming after completing 2 or 3 Run...
Find maintenance, best practice, and troubleshooting articles.
Any help to resolve this error.
Restarting done.
Plunger replaced.
Syringe replaced.
But still this error coming after completing 2 or 3 Run...
From the 7693 ALS manual:
Perhaps try adding (or extending) viscosity delay to see if that helps. Otherwise it may need to be sent to Agilent Service Center for repair.
Thanks for reply.
Repairing done...