Agilent GC 6890N Chemstation installation and configuration

Hi Ying,

One further though, at one point we did place the installation manual on the CD with the software under one of the folders. I am not sure if that would be in your version or not. It would be located in the main directory under either a manuals folder or a support folder.

Regards

James

Hello James,

Thank you very much for your prompt reply.  6890N is Agilent quality product.  We have several 6890N in the CBE department and they all work well.

We configured the instrument for LAN using IP address 10.1.1.101.  I believe the IP address is standard, so I checked another 6890N GC configuration.

Thank you again

Sincerely your

Ying

Hi yzhan695,

I went ahead and flagged this post as “Assumed Answered”.  If you still need help though, please let us know and we would be happy to continue working with you. If the issue is resolved please feel free to update us or mark correct answer.

Regards

James

Hi Ying,

Its should be a basic setup as you mention. If its slow, it can sometimes be that extra settings such as a gateway are being used when its not necessary.

GC 10.10.10.101

SM 255.255.255.0

GW Nothing entered here

PC IP 10.10.10.102

sm 255.255.255.0

GW No entry

No entries in DNS

Make sure any firewalls are off, I don't remember if NT had Windows firewall, but if so, it needs to be off.

James

Hi Ying,

Its should be a basic setup as you mention. If its slow, it can sometimes be that extra settings such as a gateway are being used when its not necessary.

GC 10.10.10.101

SM 255.255.255.0

GW Nothing entered here

PC IP 10.10.10.102

sm 255.255.255.0

GW No entry

No entries in DNS

Make sure any firewalls are off, I don't remember if NT had Windows firewall, but if so, it needs to be off.

James