Intuvo 9000 and mantainance costs..

Hi dmarchini,

I have attached a guide for some recommended spares. The questions of cost to maintain any GC is a difficult one as the application and sample amount plays a major role. Replacement of the consumables will vary because of this. The guard chip is there to protect the column so the benefit is that you end up with a longer column life. Perhaps other community members with Inruvos will weigh in on their experiences. 

Regards

James 

Thank you, I had that pdf.

Do you use Intuvo 9000? Can you tell me your experience?

Thank you, it doesn't seem so popular this Intuvo 9000 GC

People are still devoted to 7890.

Hi dmarchini 

see blow link it is contains a lot of information about Intuvo 9000

https://www.agilent.coIt contains a lot of information aboutm/cs/library/catalogs/public/5991-9325EN_Intuvo-Consumables-Supplies-Catalog.pdf 

Regards

Dheya

Hi

Unfortunately, we do not use it in our laboratory.

we using many GC 6890N and 7890B for daily samples about 20 to 30 sample in our gas plant

is it durable and easy during maintenance.

and now request GC8890 but as james_jenkins said the choice of device depends on application and sample amount and samples numbers. 

Dheya

Hi dmarchini

There will be a webinar given by a lab manager using Intuvos in his lab. The webinar is April 7. I added some information below. The link to register is https://webinar.sepscience.com/form/new-ways-of-quality-control-qc-process-with-gc-innovations

Agilent Technologies in collaboration with Siegwerk presents an upcoming webinar describing how innovative GC column heating and an end to column trimming can significantly increase the speed of universal methods.

This presentation from Siegwerk, will offer best practices for setting up, optimizing, and running this method on a new, cost-effective GC/MS system using Intuvo 9000 GC.

Time : Broadcast #1: 12pm New Delhi, 2.30pm Singapore, 3.30pm Tokyo, 4.30pm Sydney

             Broadcast #2: 7am PDT, 10am EDT, 3pm BST, 4pm CEST

             Broadcast #3: 11am PDT, 2pm EDT

Duration: Approximately 60 minutes