7890B GC Dual detector

Question

Hi, Please could you confirm if it possible to have a FID and a MSD detector both installed on the 7890B GC - 1 as the front detector and 1 as the back detector?

james_jenkins · Accepted Answer

Hi camelia, I just checked the order guide, and you can have a GCMSD plus one other signal without purchasing anything additional. MSD has to be a 5975 or newer. The GC has to be 6890N or newer. Regards James

camelia · Answer

OK James. Thanks and Best Regards

james_jenkins · Answer

Hi camelia, The hardware is capable of GCMSD with FID . Software you would need MassHunter installed if you are not already using MassHunter. Regards James

camelia · Answer

Hi James Thanks for your reply. Can the GCMSD with FID run with Openlab 2.3?

camelia · Answer

Hi James, Thanks for the info. Please can you clarify if it is possible to add a MSD to an existing GC-FID and operate with Openlab 2.3 software?

james_jenkins · Answer

From reply above , yes, for further detailed information I would suggest contacting your local sales representative. Regards James

7890B GC Dual detector

Top Replies