Hi,
Please could you confirm if it possible to have a FID and a MSD detector both installed on the 7890B GC - 1 as the front detector and 1 as the back detector?
Hi,
Please could you confirm if it possible to have a FID and a MSD detector both installed on the 7890B GC - 1 as the front detector and 1 as the back detector?
Hi camelia,
The hardware is capable of GCMSD with FID . Software you would need MassHunter installed if you are not already using MassHunter.
Regards
James
Hi James
Thanks for your reply. Can the GCMSD with FID run with Openlab 2.3?
Hi James,
Thanks for the info. Please can you clarify if it is possible to add a MSD to an existing GC-FID and operate with Openlab 2.3 software?
OK James.
Thanks and Best Regards
Hi camelia,
I just checked the order guide, and you can have a GCMSD plus one other signal without purchasing anything additional. MSD has to be a 5975 or newer. The GC has to be 6890N or newer.
Regards
James
From reply above , yes, for further detailed information I would suggest contacting your local sales representative.
Regards
James
From reply above , yes, for further detailed information I would suggest contacting your local sales representative.
Regards
James
OK James.
Thanks and Best Regards