How to Inject Both Headspace and Liquid Samples on the Same GC Inlet

In this video Shannon Coleman discusses how to use a headspace sampler and an automated liquid injector on the same inlet using the Agilent Transfer-line Interface Accessory.  

DE.6015972222

Anonymous
Parents
  • Nice info..

    I have one question like polymer type sample need heated zone then how it will heat that transferline coming out of headspace sampler as i saw in video that 1/16 line is going in inlet without any heat...

    It look like valve fitting but it's not same..

  • Ish, the transferline and the interface are both heated.  The transferline nut does not have direct heat, however since it directly next to a heater block on the interface so it is very hot.  

Comment
  • Ish, the transferline and the interface are both heated.  The transferline nut does not have direct heat, however since it directly next to a heater block on the interface so it is very hot.  

Children
Was this helpful?