How to Inject Both Headspace and Liquid Samples on the Same GC Inlet

In this video Shannon Coleman discusses how to use a headspace sampler and an automated liquid injector on the same inlet using the Agilent Transfer-line Interface Accessory.  

DE.6015972222

Anonymous
  • Hello KStegg

    I have attached the installation manual.  If you have further questions please contact our free GC support number (800) 227-9770 or email them at gc-column-support@agilent.com and they can walk you through any details or specific challenges you have run into with the installation.

    Best Regards

    Shannon

  • I needed to replace a transfer line on this interface assembly and I was having trouble finding instructions.  Can you help?

  • Very hot..True..

    But you know, sometimes auditor, put question, how you are checking temperature of this zone..

  • Ish, the transferline and the interface are both heated.  The transferline nut does not have direct heat, however since it directly next to a heater block on the interface so it is very hot.  

Was this helpful?