Cylinder pressure for He, O2, and H2 gases in ICP-MS

Hi, I think you are asking for the input pressure of the cell gases. 
you will find them at the back of the instrument. 
just divide the kPa values by 100 to get bar. 

cheers

Chris

Hi, I think you are asking for the input pressure of the cell gases. 
you will find them at the back of the instrument. 
just divide the kPa values by 100 to get bar. 

cheers

Chris

Dear Chris,

Following the example picture you provided, does this mean that the working pressure (i.e. the outlet delivery pressure of the gas) should be 0.9-1.3 bar (90-130 kPa) for the He cylinder, and 0.2-0.6 bar (20-60 kPa) for H2 and 3rd cell gas cylinders?

Thank you again for your help!

Best,

Francesco

Yes thats correct